Phosphorus-Doped Nickel Oxide Micro-Supercapacitor: Unleashing the Power of Energy Storage for Miniaturized Electronic Devices.

For an uninterrupted self-powered network, the requirement of miniaturized energy storage device is of utmost importance. This study explores the potential utilization of phosphorus-doped nickel oxide (P-NiO) to design highly efficient durable micro-supercapacitors. The introduction of P as a dopant serves to enhance the electrical conductivity of bare NiO, leading to 11-fold augmentation in volumetric capacitance to 841.92 Fcm-3 followed by significant enhancement of energy and power density from 6.71 to 42.096 mWhcm-3 and 0.47 to 1.046 Wcm-3, respectively. Theoretical calculations used to determine the adsorption energy of OH- ions, revealing higher in case of bare NiO (1.52 eV) as compared to phosphorus-doped NiO (0.64 eV) leading to high electrochemical energy storage performance. The as-designed micro-supercapacitor (MSC) device demonstrates a facile integration with the photovoltaic system for renewable energy storage and smooth transfer to external loads for enlightening the blue LED for ≈1 min. The choice of P-NiO/Ni not only contributes to cost reduction but also ensures minimal lattice mismatch at the interface facilitating high durability up to 15 K cycles along with capacitive retention of ≈100% and coulombic efficiency of 93%. Thus, the heterostructure unveils the possibilities of exploring miniaturized energy storage devices for portable electronics.

Porous Carbon Template Decorated with MOF-Driven Bimetallic Phosphide: A Suitable Heterostructure for the Production of Uninterrupted Green Hydrogen via Renewable Energy Storage Device.

Water splitting via an uninterrupted electrochemical process through hybrid energy storage devices generating continuous hydrogen is cost-effective and green approach to address the looming energy and environmental crisis toward constant supply of hydrogen fuel in fuel cell driven automobile sector. The high surface area metal-organic framework (MOF) driven bimetallic phosphides (ZnP2 @CoP) on top of CNT-carbon cloth matrix is utilized as positive and negative electrodes in energy storage devices and overall water splitting. The as-prepared positive electrode exhibits excellent specific capacitances/capacity of 1600 F g-1 /800 C g-1 @ 1A g-1 and the corresponding hybrid device reveals an energy density of 83.03 Wh kg-1 at power density of 749.9 W kg-1 . Simultaneously, the electrocatalytic performance of heterostructure shows overpotentials of 90 mV@HER and 204 mV@OER at current density of 10 and 20 mA cm-2 , respectively in alkaline electrocatalyzer. Undoubtedly, it shows overall water splitting with low cell voltage of 1.53 V@10 mA cm-2 having faradic and solar-to-hydrogen conversion efficiency of 98.81% and 9.94%, respectively. In addition, the real phase demonstration of the overall water-splitting is performed where the electrocatalyzer is connected with a series of hybrid supercapacitor devices powered up by the 6 V standard silicon solar panel to produce uninterrupted green H2 .

Photo-Rechargeable Li-Ion Batteries using TiS2 Cathode.

Photo-rechargeable (solar) battery can be considered as an energy harvesting cum storage system, where it can charge the conventional metal-ion battery using light instead of electricity, without having other parasitic reactions. Here a two-electrode lithium-ion solar battery with multifaceted TiS2 -TiO2 hybrid sheets as cathode. The choice of TiS2 -TiO2 electrode ensures the formation of a type II semiconductor heterostructure while the lateral heterostructure geometry ensures high mass/charge transfer and light interactions with the electrode. TiS2 has a higher lithium binding energy (1.6 eV) than TiO2 (1.03 eV), ensuring the possibilities of higher amount of Li-ion insertion to TiS2 and hence the maximum recovery with the photocharging, as further confirmed by the experiments. Apart from the demonstration of solar solid-state batteries, the charging of lithium-ion full cell with light indicates the formation of lithium intercalated graphite compounds, ensuring the charging of the battery without any other parasitic reactions at the electrolyte or electrode-electrolyte interfaces. Possible mechanisms proposed here for the charging and discharging processes of solar batteries, based on the experimental and theoretical results, indicate the potential of such systems in the forthcoming era of renewable energies.

In-vitro toxicity assessment of a textile dye Eriochrome Black T and its nano-photocatalytic degradation through an innovative approach using Mf-NGr-CNTs-SnO2 heterostructures.

The present study aimed to assess the in-vitro toxicity of a popular azodye, Eriochrome Black T (EBT) which may be an environmental hazard causing water pollution if released by textile industries as waste effluents to nearby water ponds. We explored the toxic potential of EBT at 200, 400 and 800 µg/ml concentrations, which were selected based on quantification of EBT present in the pond water near carpet industries. We investigated the permeability of EBT across the organ barriers and found it to be 6.48 ± 0.44% at the highest concentration. EBT also showed up to 26.46 ± 0.533% hemolytic potential on human RBCs. MTT assay revealed toxicity of up to 64.9 ± 10.12%. A dose-dependent increase in intracellular ROS levels and Caspase 3/7 activity was observed and confocal microscopy also demonstrated a similar trend of cellular apoptosis indicating ROS mediated induction of apoptosis as a mechanism of EBT induced cytotoxicity. After establishing the toxicity of EBT, an innovative nano-photocatalytic approach for dye remediation was applied by using as synthesized Mf-NGr-CNTs-SnO2 heterostructures. This catalyst showed dye degradation potential of up to 82% in 2 h in the presence of sun light. The degraded dye products were tested to have up to 30% reduced cellular toxicity as compared to the parent compound. This work successfully establishes the toxicity of EBT along with devising an innovative approach towards dye degradation where the catalyst is adhered on melamine foam and not being mixed in the effluents directly, thereby, reducing the possibility of catalyst being leached out into the river water.

Super-Hydrophilic Leaflike Sn4P3 on the Porous Seamless Graphene-Carbon Nanotube Heterostructure as an Efficient Electrocatalyst for Solar-Driven Overall Water Splitting.

Water splitting using renewable energy resources is an economic and green approach that is immensely enviable for the production of high-purity hydrogen fuel to resolve the currently alarming energy and environmental crisis. One of the effective routes to produce green fuel with the help of an integrated solar system is to develop a cost-effective, robust, and bifunctional electrocatalyst by complete water splitting. Herein, we report a superhydrophilic layered leaflike Sn4P3 on a graphene-carbon nanotube matrix which shows outstanding electrochemical performance in terms of low overpotential (hydrogen evolution reaction (HER), 62 mV@10 mA/cm2, and oxygen evolution reaction (OER), 169 mV@20 mA/cm2). The outstanding stability of HER at least for 15 days at a high applied current density of 400 mA/cm2 with a minimum loss of potential (1%) in acid medium infers its potential compatibility toward the industrial sector. Theoretical calculations indicate that the decoration of Sn4P3 on carbon nanotubes modulates the electronic structure by creating a higher density of state near Fermi energy. The catalyst also reveals an admirable overall water splitting performance by generating a low cell voltage of 1.482 V@10 mA/cm2 with a stability of at least 65 h without obvious degradation of potential in 1 M KOH. It exhibited unassisted solar energy-driven water splitting when coupled with a silicon solar cell by extracting a high stable photocurrent density of 8.89 mA/cm2 at least for 90 h with 100% retention that demonstrates a high solar-to-hydrogen conversion efficiency of ∼10.82%. The catalyst unveils a footprint for pure renewable fuel production toward carbon-free future green energy innovation.

Super-Hydrophilic Hierarchical Ni-Foam-Graphene-Carbon Nanotubes-Ni2P-CuP2 Nano-Architecture as Efficient Electrocatalyst for Overall Water Splitting.

Water splitting via an electrochemical process to generate hydrogen is an economic and green approach to resolve the looming energy and environmental crisis. The rational design of multicomponent materials with seamless interfaces having robust stability, facile scalability, and low-cost electrocatalysts is a grand challenge to produce hydrogen by water electrolysis. Herein, we report a superhydrophilic homogeneous bimetallic phosphide of Ni2P-CuP2 on Ni-foam-graphene-carbon nanotubes (CNTs) heterostructure using facile electrochemical metallization followed by phosphorization without any intervention of metal-oxides/hydroxides. This bimetallic phosphide shows ultralow overpotentials of 12 (HER, hydrogen evolution reaction) and 140 mV (OER, oxygen evolution reaction) at current densities of 10 and 20 mA/cm2 in acidic and alkaline mediums, respectively. The excellent stability lasts for at least for 10 days at a high current density of 500 mA/cm2 without much deviation, inferring the practical utilization of the catalyst toward green fuel production. Undoubtedly, the catalyst is capable enough for overall water splitting at a very low cell voltage of 1.45 V @10 mA/cm2 with an impressive stability of at least 40 h, showing a minimum loss of potential. Theoretical study has been performed to understand the reaction kinetics and d-band shifting among metal atoms in the heterostructure (Ni2P-CuP2) that favor the HER and OER activities, respectively. In addition, the catalyst demonstrates an alternate transformation of solar energy to green H2 production using a standard silicon solar cell. This work unveils a smart design and synthesizes a highly stable electrocatalyst against an attractive paradigm of commercial water electrolysis for renewable electrochemical energy conversion.